Pressure pot manufacturers

When evaluating pressure pots, prioritize material thickness and grade, typically 304 or 316 stainless steel for corrosion resistance. Ensure the Maximum Allowable Working Pressure (MAWP) aligns with your operational needs, usually ranging from 60 to 100 PSI for painting or resin casting. Check for dual-regulation systems that allow independent control of pot pressure and atomization pressure, and verify that the agitator type (manual or pneumatic) suits your material viscosity.

Pressure vessels are high-risk items; therefore, compliance with the ASME Section VIII (USA), CE/PED 2014/68/EU (Europe), or SQL (China) is essential. Ensure the supplier provides a hydrostatic test report and that each unit is equipped with a certified safety relief valve set to trigger at 10% above working pressure to prevent catastrophic failure.

Focus on the gasket material; Teflon or Solvent-resistant synthetic rubber is preferred for longevity against harsh chemicals. Examine the lid clamping mechanism—heavy-duty swing bolts are superior to simple thumb screws for maintaining a consistent seal under high pressure. Request a leakage test video or a third-party inspection report showing zero pressure drop over a 24-hour period.

For industrial spray painting, 10–40 liter pots are standard, while resin degassing or wood stabilization may require larger, wide-mouth tanks. For high-viscosity materials like glues or heavy coatings, ensure the pot features a bottom-out port to facilitate easier material flow and reduce waste.

The biggest risk is Customs seizure due to lack of pressure vessel certification. Many countries require specific import permits for boilers and pressure vessels. Always confirm the HS Code (typically 7311.00 or 8424.89) with your broker and ensure the supplier marks the serial number and technical parameters clearly on a metal nameplate riveted to the tank.

Utilize Made-in-China.com's Secured Trading services to protect your payment until shipping documents are verified. Negotiate a 30/70 payment structure, where the final 70% is paid only after a pre-shipment inspection (PSI) confirms the pressure gauge accuracy and weld quality. For bulk orders, ask for consumable spare parts (gaskets and safety valves) to be included at no extra cost.

Pressure pots are heavy and prone to denting, which compromises structural integrity. Insist on plywood crate packaging rather than standard cardboard. Ensure the pressure gauge is detached and packed separately in bubble wrap to prevent calibration shift or breakage during transit. For sea freight, specify FOB terms to maintain control over the logistics provider and insurance coverage.